CAST HIGH-STRENGTH ENGINEERED METAL PARTS - Equivalent to those produced by pressure die casting and other fabrication processes. The TEKCAST rubber mold centrifugal Spin-Casting System provides high levels of strength, close tolerances and excellent reproduction of detail. It produces high-quality parts in commercial grade: ZINC ALLOYS, TIN ALLOYS & LEAD ALLOYS

Cast Rapid Prototyping & Product Development Parts In Just Hours! IMPROVE DESIGN FLEXIBILITY - Molds can be made and prototypes or development parts cast in as little as three hours. Design changes in size, function, fit or appearance are quickly reproduced without making or wasting a large tooling or machine-time investment.

From Pattern/Model To Production Castings In Less Than One Day. TEKCAST SPIN-CASTING PROVIDES A HIGHLY COST EFFECTIVE ALTERNATIVE TO LIMITED-RUN PRECISION DIE CASTING AND OTHER CASTING OR FABRICATION TECHNIQUES - An entire TEKCAST Spin-Casting system can be set up for less than the cost of one moderately complex die casting mold.

Molds are available in both high teperature resistant Silicone or Organic Rubber compounds, the selection of which depends on the melting temperature of the casting alloy being used. The longer lasting TEKSIL™ Silicone rubber molds can be cycled as many as 50-60 times per hour, for hundreds of cycles. For example: a 20-part/cavity mold can produce 1000-1200 components per hour, thus providing high production run capabilities.

PRECISION CASTING PROCESS - Production Parts Typically Meet Tolerances in the ±.005-.008 Inch per Inch Range.

CAST PRECISION WAX PATTERNS - For use in Lost Wax Investment Casting of Ferrous and Non Ferrous Metal Parts.

Precision engineered industrial and electro/mechanical parts are now being produced by Tekcast’s advanced Spin-Casting technology.		Produce highly detailed decorative, novelty objects and hardware items with high quality and finish; suitable for plating, antiquing or polishing. Little or no clean-up required.

SPIN-CAST THERMOSET PLASTICS... Low Cost Alternative To Injection Molding.

THE PLASTICS USED ARE THE QUICK-SETTING LIQUID THERMOSETS WHICH READILY FILL TEKSIL™ MOLDS AT “ROOM” TEMPERATURES - Many can closely match the properties & characteristics of typical injection-molded thermoplastics.

They include: POLYURETHANES, POLYESTERS, EPOXIES, ELASTOMERS. Spin-Cast thermoset plastics offer fine detail and close tolerances while saving time and major costs over competitive processes, because there is no tooling to amortize.

Produce a broad range of both functional and decorative plastic parts using a variety of high-strength, commercial grade thermoset plastics